If you have a fuel oil boiler and you are wondering how you can save money on your heating bill without replacing your boiler then I have good news for you! By adding a simple device to the burner of your boiler you can be saving at least 10% in minutes.
The Beckett HeatManger is a microprocessor controlled device that will manage the on/off cycles of your boiler. Every time your boiler has to shut down and then restart your have just lost a bit of efficiency. By reducing the start/stop cycles of your boiler you not only reduce fuel consumption, but you also reduce wear on the parts of the boiler and emissions coming from your boiler. Your burner burns very inefficiently on startup and shut down. When I have my combustion analyzer on a burner it goes crazy with bad gasses right after shutdown.
With this control if your thermostat requests heat and the HeatManager has sensed that there is heat available in the boiler, it will not start the burner until the heat is used up. When the burner is running, the HeatManger will optimize the runtime to match the boiler output to the load.
The unit is very easy to install. It is mounted to the junction box under the relay and wired into the normal burner relay wiring. There are a couple of sensors that need to be attached. One senses the supply water temperature for heating, coming out of the boiler and the other senses domestic hot water boiler supply temperature.
Even if you would decide to get a professional to install this unit you will be on the road to saving big dollars while only spending few hundred bucks. Then when the price of fuel oil begins to rise again, which it will this winter, you will be getting even more savings from your small investment.
Saving money is always a good thing, but when you can combine saving money with greater comfort than I would call that a great thing!
Floyd Kolb has worked in the Mechanical/Hvac industry for over 20 years, gaining a wealth of knowledge to share. With this knowledge my goal is to share with you the products that can make a difference in your life. There are a few air purification products and heating products that can impact your life in a very positive way. You can learn more about these products by going to http://www.whyearnmoney.com
OPERATING YOUR DAKA WOODBURNING FURNACE (PART 4 OF 4)
|
|
Oil Burner $1.29 Oil Burner |
|
|
The 2007-2012 World Outlook for Gas and Oil Floor and Wall Furnaces $734.79 The 2007-2012 World Outlook for Gas and Oil Floor and Wall Furnaces |
|
|
The 2009-2014 World Outlook for Gas and Oil Floor and Wall Furnaces $734.79 The 2009-2014 World Outlook for Gas and Oil Floor and Wall Furnaces |
|
|
Forced Hot Air Furnaces $25.48 * Complete Troubleshooting & Repairing guide to hot air furnaces * Complete operation, maintenance, and repair * Covers gas, oil, and electric forced air systems * Includes flowcharts and highlighted tips and solutions to common furnace problems |
|
|
Forced Hot Air Furnaces $32.31 * Complete Troubleshooting & Repairing guide to hot air furnaces* Complete operation, maintenance, and repair* Covers gas, oil, and electric forced air systems* Includes flowcharts and highlighted tips and solutions to common furnace problems |
|
|
Forced Hot Air Furnaces $28.5 * Complete Troubleshooting & Repairing guide to hot air furnaces* Complete operation, maintenance, and repair* Covers gas, oil, and electric forced air systems* Includes flowcharts and highlighted tips and solutions to common furnace problems |
|
|
Gas & Oil Furnaces $74.05 No Synopsis Available |
|
|
Industrial and Process Furnaces $115.98 Industrial and Process Furnaces provides a comprehensive reference to all aspects of furnace operation and design, with coverage of key topics that plant and process engineers and operators need to understand, including the combustion process and its control, furnace fuels, efficiency, burner design and selection, aerodynamics, heat release profiles, furnace atmosphere, safety and emissions. * Helps to understand complex heat and mass transfer and combustion problems* Outlines the key elements of furnace theory for optimum design* Shows how to achieve best possible furnace operation* Practical, stepped approach breaks topics down to their constituent parts for clarity and easier solution * Practical examples further assist in the analysis of real-world problemsDeveloped by authors with experience of a wide range of industrial applications, this book is written for chemical and process engineers, mechanical, design and combustion engineers and students. It is ideal for both task-based problem solving and more detailed analysis work.* Up-to-date and comprehensive reference covering not only the principles of best practice operation but also the essential elements of furnace theory and design that are essential for engineers and all practitioners who use or work with furnaces, ovens and combustion based systems* Invaluable coverage of all key process furnace applications; an ideal resource for chemical and process, mechanical, design and combustion engineers and students for both task based problem solving and more detailed analysis work.* Takes a holistic, stepped approach to complex heat and mass transfer and combustion problems, breaking topics down to their constituent parts for easy understanding and solution* Case studies and practical examples further assist in the application of complex analysis to real-world problems* Unlike other books written specifically on combustion or furnace operation, this book covers all aspects of furnace and combustion operation, including the combustion process and its control, furnace fuels, efficiency, burner design and selection, aerodynamics, heat release profiles, furnace atmosphere ad emissions, and brings all these elements together to show how to achieve optimum design and operation.* Practical chapters on fuel handling, furnace control, emissions control and regulations, construction and maintenance practice ensure that this book provides the most comprehensive single reference on Industrial Furnaces available. |
|
|
Third Oil Shock: The Effects of Lower Oil Prices $10.95 Third Oil Shock: The Effects of Lower Oil Prices |
|
|
Head, Oil Burner F-3 $17.54 “Pricing subject to change. Head, Oil Burner F-3″ |
|
|
The 2007-2012 World Outlook for Non-Electric Oil Forced Warm Air Furnaces and Humidifiers with 150,000 BTU Bonnet Output and under $734.79 The 2007-2012 World Outlook for Non-Electric Oil Forced Warm Air Furnaces and Humidifiers with 150,000 BTU Bonnet Output and under |
|
|
The 2007-2012 World Outlook for Non-Electric Warm Air Furnaces Excluding Gas and Oil Forced Air $734.79 The 2007-2012 World Outlook for Non-Electric Warm Air Furnaces Excluding Gas and Oil Forced Air |
|
|
The 2009-2014 World Outlook for Non-Electric Oil Forced Warm Air Furnaces and Humidifiers with 150,001 BTU Bonnet Output and over $734.79 The 2009-2014 World Outlook for Non-Electric Oil Forced Warm Air Furnaces and Humidifiers with 150,001 BTU Bonnet Output and over |
|
|
The 2009-2014 World Outlook for Non-Electric Oil Forced Warm Air Furnaces and Humidifiers with 150,000 BTU Bonnet Output and under $734.79 The 2009-2014 World Outlook for Non-Electric Oil Forced Warm Air Furnaces and Humidifiers with 150,000 BTU Bonnet Output and under |
|
|
The 2009-2014 World Outlook for Non-Electric Warm Air Furnaces Excluding Gas and Oil Forced Air $734.79 The 2009-2014 World Outlook for Non-Electric Warm Air Furnaces Excluding Gas and Oil Forced Air |
|
|
Sloss Furnaces $19.79 Sloss Furnaces |
|
|
Western Spurs Oil Burner $16 Western Spurs Oil Burner. Resin/metal. 7 x 7. |
|
|
Forced Hot Air Furnaces: Troubleshooting and Repair $42.95 * Complete Troubleshooting & Repairing guide to hot air furnaces * Complete operation, maintenance, and repair * Covers gas, oil, and electric forced air systems * Includes flowcharts and highlighted tips and solutions to common furnace problems |
|
|
Oil Burner Control $78.05 Provides automatic, nonrecycling control of an intermittent ignition oil burner system. Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat. Solid state flame sensing circuit. LED on terminal strip indicates system lockout. Enclosed safety switch with external reset button. Manual trip lever opens safety switch for system maintenance. Mounts on standard 4 x 4 junction box. C554A cadmium sulfide flame detector and 24V thermostat required. |
|
|
The Behavior of Non-Oil Commodity Prices $15 This book is in New – Excellent condition |
